便携式电站320Wh户外发电机,110V/500W交流插座和LED手电筒,超级安全的备用锂电池

产品详情:
原产地: China
品牌名称: Ryder
认证: UL2743,FCC,CE,UN38.3,Rohs,REACH,加州65
产品型号: T300-EU/CH/UK/JP
付款和运送条款:
供货能力: 2000PCS /Day
规格 产品说明 在线留言
规格
规格
标称电压: 400WH
标称容量: 25Ah
出厂电压: 12.8V
执行标准: UL2743,FCC,CE,UN38.3,Rohs,REACH,加州65
工作温度: 充电:0~40℃
产品规格: 240*133*201mm
开发定制: ODM
产品说明
本产品是一款便携式储能产品;额定输出总功率约 400W;分别为 AC-200W//PD-45W*1/USB-24W(
USB1+USB2)/点烟器
120W ,具有交流(110VAC/200W)、USB-A、Type C、DC(5521)和点烟器 四种不同端口输出。系统有直流充电端口,
可单独搭配直流光伏、车载直流输出、AC 适配器 对系统进行充电;PD 接口支持 45W 充电,可使用具备 TYPE-C 接口的
PD 充电器进行充电。
  • DC INPUT + PD INPUT/OUTPUT )
DC INPUT
Item Min Type Max Remark
Rated Input voltage 10V 15V 25V Whichever Non load or loading
Rated Input current - 3A 3.5A  
Rated Input power   45W   Automatic adjustment according input power
Ripple voltage of charging - - 200mV

Test from the Input connector, oscilloscope Bandwidth

setup as 20MHZ, parallel with 10uF and 0.1uF capacitor

Input over-current protection - - -  
Input Lower-voltage protection - - 5V  
Input over-voltage protection 25V - 27V

The devices will stop charging If the Input voltage

exceed the protection voltage

Input port short-circuit protection - - - Stop charging, components no damage
Input polarity reverse protection - - - Support(not charging if input polarity reverse)
Input adapter compatibility 10-15 VDC
Solar panel charging 18-24V with mppt function
Pass through function The device can support discharging while the product is charging; the Type-C Output power will drop down to 36W if the product charging via DC Input port.
LCD display of charging Display the charging power and battery capacity
Battery charging suggestion
  1. Suggestion charging the device every 2 or 3 month;
  2. Self consumption: <2mA

 

便携式电站320Wh户外发电机,110V/500W交流插座和LED手电筒,超级安全的备用锂电池 0
Item Min Type Max Remark

PD45W

Charge and Discharge

4.75V 5.0V 5.5V
  1. PCBA board end voltage;
  2. 5V/9V/12V/15V Rated input/output current:3A

20V Rated input/output current:2.25A

8.55V 9V 9.45V
11.4V 12V 12.6V
14.25V 15V 15.75V
19V 20V 21V

Apple 5V/2.4A

Charge and Discharge

4.75V 5.0V 5.25V Protocol: BC1.2 DCP; Apple 2.4A
    2.4A
Output short circuit protection       Turn off discharging

 

  • DC (5521)Output features
  Min Type Max Remark
Output voltage range 10.8V 12.0V 14.6V  
Allowable output current - 10A -  
Allowable output power - 120W 146W  
output current - 10A 12A CV 12V test
Output ripple - - < 150mV Rated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor, the ripple < 800mV while AC Output loading
Discharging efficiency >92% - - Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.
Limited current protection 10A - 13A The output will turn off if the output current is exceed specified value; the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.
Output over-voltage protection 15V - 16.8V The output will turn off when the product
doesn't work properly and the output
voltage is exceed specified value.  
Short circuit protection - support - The output will turn off and the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.
             
  • 便携式电站320Wh户外发电机,110V/500W交流插座和LED手电筒,超级安全的备用锂电池 1
  • USB1&2 Output features
Item Min Type Max Remark  
Output voltage range 4.75V 5V 5.25V    
Allowable output current - 2.4A -    
Allowable output power   12W      
CC Output 2.1 2.4 2.5A CV 4.75V Test model  
Output ripple - - < 150mV Rated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor,  
Discharging efficiency >92% - - Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.  
Limited current protection 2.5A   3A The output will turn off if the output current is exceed specified value;  
Output over-voltage protection 6.2V - 6.8V The output will turn off when the product doesn't  
  work properly and the output voltage is exceed  
specified value.    
Short circuit protection -

suppor

t

- The output will turn off if the output port is short circuit by wire or external devices; the product will be automatically recovery work normally  
        after cutoff the loading.
                 
Item Min Type Max Remark
  •  
  • AC Sine wave output features:
Item Min Type Max Remark
Output voltage range 200V 220V 240V  
Rated output current - 0.9A -  
Rated output Power   200W    
Output frequency 47 Hz 50 Hz 53Hz  
Non-loading current     600mA  
Discharging efficiency >85% - - Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.
Over loading protection 220W - 300W

The output will turn off if the output power is exceed specified value;

the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.

Over temperature protection Of AC board 80℃ - 100℃ Tthe output will turn off, the product can be recovery work normally after temperature down and press the key button

Over temperature recovery

Of AC board

70℃ - 80℃
Fan start 55℃   65℃  
Fan stop 45℃   55℃  
Short circuit protection -

suppor

t

- The output will turn off and the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.

Remark: the fan will stop runing if the the AC board was temperature protection.

  • Automatic power off parameter:
Item   Min Type Max Remark
USB1 turn-off current -   80 mA 100 mA  
USB2 turn-off current -   80 mA 100 mA  
DC turn-off current -   50mA 80 mA  
AC turn-off power -   3W 4W  
TYPE-C turn-off current     50mA 80mA  
LED light turn-on -   - - The automatic will be not available while LED light is turn on.

Remark:

  1. Above parameter value only specified for each one port, the connect more than one port, the turn-off current will count all the port of current.
  2. The default setting is turn-on the automatic power off function,the user can press the DC + AC key button for 3S, the buzzer short ringing 2 times, the automatic power off function will be turn-off; press the DC + AC key button for 3S again, the buzzer long ringing 1 time,the automatic power off function will be recovery work normally;
  3. The automatic power off function also be recovery work normally after re turn-on the product After turn off the product ≥10S.

3.5 LED light function:

LED Current - 150mA 250 mA  
LED Voltage - 18V 21V  
LED Power - 3.6W 5.25W  
Lamp color temp. - 4500K -  
Lamp qty.   12    

4.Battery features:

No. content Testing method Remark
1 Charge cut-off voltage 13.8V  
2 Discharge cut-off voltage 8.8V  
3 Standard charge

Under the condition of the ambient temperature of 25±2℃,

Charge the battery at constant current of 0.2C to reach 13.8V. Then charge the battery at constant 13.8V voltage until the charging current decreasing to 0.02C.

 
4 Standard discharge After the standard charging,rest for 1 hour then discharge to 8.8V@0.2C.  
5 Shipments voltage   Quantity of electricity≤30 %
6

Maximum Charge

Current

≤12A  
7

Maximum

continuous working current

≤30A Instantaneous current≤ 60A time≤2S
8 Rated capacity

Typical capacity:250000mAh

Minimum capacity:24600mAh-5%

standard

discharge after standard charge

9 Operation temperature range charge:0~40℃ humidity:60±25% 60±25%R.H
discharge:-10~40℃
10 Storage temperature ≤1 month: -20 ~ 45℃

60±25%R.H

Best 10~25℃ for

    ≤3 months: -10 ~ 30℃ long-time storage
≤1 year: 0 ~ 30℃
11 Impedance <80mΩ  
12 Weight Approx:≈2400g  

5.Environment features:

LCD Function Over temperature warning, display the AC ! and buzzer ringing 3 times when temperature protection action
Display current total charging power, discharging power.
The key button’s LED blinking during abnormal of AC i protection action
LED function key button with LED
Discharge compatibility The specified devices can be quick charge available.
Working temperature

Charging: 0-40 °C

Discharging: -10-40 °C

Storage temperature -20 ~ 45℃
Working Humidity 20-90%RH
Storage Humidity 10-95%RH
  1. Safety features:

6.1:ESD features:

ESD
  1. Environment temperature:15~27℃;
  2. Humidity: ≤50%;
  3. Test location: available touched metal and other parts.

Contact Discharge

+/-4kv, Normal recovery function allowed

Air Discharge

+/-8kv, Normal recovery function allowed

  1. Dielectric Strength :

Dielectric

Strength

(Hi- pot)

Inverter output L/N VS DC Input

3000VAC 50Hz/10mA(Max)/60 Second,

No breakdown and flashover

 


Delivery Time:

- Material Preparation Time: 7-15 days (or inventory)

- Production & Assembly Time 3-10 days

- Testing & Packaging Time: 2-10 days

- Total Delivery Time: 30-45days

- The faster delivery could be negotiable.

Factory photo:

 

便携式电站320Wh户外发电机,110V/500W交流插座和LED手电筒,超级安全的备用锂电池 2

 



Contact with our sales team for your OEM and ODM order.

OEM/ODM Service:
If you want to display your own brand logo in products, bags, labels or anywhere. Or you need to develop battery packs according to your product orientation. Our OEM and ODM services are ready to do it.

Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet

 

Ryder Electronics established in Shenzhen on July 18, 2005, mainly in the business of battery packs. In 2009 the company passed ISO9001 and improved the product quality standard to fulfill the high-end requirements from our customers.

In 2012, Ryder Electronics moved to a new facility and expend the production capacity, the Productivity improved nearly 10 times than before.

In 2013, Ryder Electronics imported ERP (SAP) system to supervise order execution process.

In 2017, Ryder Electronics expanded the SMT, imported high-speed patch machine from Germany.

Until now the factory grows into a modern enterprise which integrated injection molding, PCB designing, SMT and battery pack assembling services.

In 2018 the company passed ISO14001certification, introduced automated battery production line to further improve the production quality and capacity.

 
推荐产品
请与我们联系
剩余字符(20/3000)